{"id":22494,"date":"2023-11-04T10:40:11","date_gmt":"2023-11-04T08:40:11","guid":{"rendered":"https:\/\/www.branchthetree.com\/?p=22494"},"modified":"2023-11-04T10:40:11","modified_gmt":"2023-11-04T08:40:11","slug":"how-deep-to-plant-a-cherry-tree","status":"publish","type":"post","link":"https:\/\/www.branchthetree.com\/how-deep-to-plant-a-cherry-tree\/","title":{"rendered":"How Deep To Plant A Cherry Tree"},"content":{"rendered":"
\n

Supplies Needed for Planting a Cherry Tree<\/h2>\n

Prior to planting, it’s important to ensure all the necessary supplies are collected in order to ensure a successful planting session. The basics for planting a cherry tree include a shovel for digging, quality potting soil, a pot for growing when necessary, mulch for insulation, and a garden hose for watering. All of these items can easily be found at any local hardware store.<\/p>\n

Select the Proper Location<\/h2>\n

In order to make sure the cherry tree thrives and grows, it’s important to select the best location possible to place the tree. Cherry trees should be planted in areas with full sun exposure, allowing for at least six to eight hours of sunlight per day. Although shallow soil is acceptable, a deeper soil bed is an ideal environment for a cherry tree, providing more robust root structure. Soil beds with a drainage system are preferred to prevent water logging. If a tree is being grown in a pot, this should also be placed where there is plenty of sunlight.<\/p>\n

Digging<\/h2>\n

Now that a good location has been identified, it’s time to dig the hole for planting. A hole should be about two feet deep for a bare-root tree, and three feet deep for a potted tree. If planting more than one tree, leave at least ten feet of space between them. Digging the hole is the most labor-intensive part of planting a cherry tree. For an efficient and quality job, the soil should be removed in sections, three to four inches at a time, then tilling the soil by hand or power so that it becomes light and well aerated. When finished, the hole should be twice as large as the root-ball of the tree.<\/p>\n

Filling the Hole<\/h2>\n

Next comes the process of filling the hole. Start off by placing a one-inch layer of the soil mixture in the bottom of the hole to aid drainage. Then place the tree in the hole, and make sure to evenly spread out the roots as you start to fill it in with the soil. As you begin to fill in the hole, press the soil down gently so it’s packed firmly in place around the roots. When there’s only a couple inches of soil left, create a sunken collar around the outer edge of the tree, to ensure that moisture remains within the tree’s root-zone.<\/p>\n

Watering <\/h2>\n